We stock a huge range of softwood timber. Our timber is mixed species but predominantly spruce. All are pressure treated whether they are sawn or planed. We can supply in full packs or as little as one piece. From capping to sleepers you can normally find what you are after and if you can’t just speak to a member of staff and we might be able to help you. We cannot offer hardwood timbers apart from our new cut green oak sleeper.
Sawn Timber Posts
All our sawn posts are pressure treated for ground contact. We stock a huge variety of sizes. These include, but are not limited to, birds
mouth , square sawn such as 100x 100mm & 75 x 75mm and a good range of paddock/motorway posts including 125 x 75mm & 150 x 75mm.
Please see our price list for the full range.
Sawn Timber Planks & Rails
We stock a huge variety of sawn timber rails & planks. The most popular being 3.6m x 87 x 38mm also know as the motorway rail. We also hold
stocks of 150 x 22mm AKA ‘Yorkshire boarding’.
Please see our price list for the full range of sizes.
All our gate posts are pressure treated for ground contact and have a four way weather at one end. We stock a good range.
1.8 m x 125 x 125mm, 2.4m 125 x 125mm
2.1m 150 x 150mm, 2.4m 150 x 150, 2.7m 150 x 150mm & 3.0m 150 x 150mm
2.1m 175 x 175mm & 2.4m 175 x 175mm,
2.4m 200 x 200mm & 2.7m 200 x 200mm.
3.0m x 150 x 150 Planed/Smooth
Pressure treated softwood available in the following sizes:
3.6 x 65 x 38mm twice weathered
3.6 x 100 x 38mm Twice weathered
1.83 x 50 x 12mm Twice weathered
1.83m x 50 x 19mm Flat (2 edges chamfered)
We stock timber purlins. They are treated for above ground use. (UC3)
Still cut to imperial lengths.
4.57 x 125 x 75mm (15ft 5 x 3)
4.57 x 175 x 75mm (15ft 7 x 3)
4.57 x 225 x 75mm (15ft x 9 x3)
6.096 x 125 x 75mm (20ft x 5 x3)-NOW GRADED C16
6.096 x 175 x 75mm (20ft 7x 3)-NOW GRADED C16
6.096 x 225 x 75mm (20ft 9 x 3)-NOW GRADED C16
Feather Edge/Vertical Board
All our Feather Edge is 2ex 125 x 22mm. This means our saw mill take aboard that is 125 x 22mm and cut it diagonally to create two pieces. The cost
listed on our price list is for a single piece of feather edge. We recommend 10 boards per meter based on a 25mm overlap.
Treated to UC3. Lengths available from stock
0.9m, 1.2m, 1.5m, 1.65m, 1.8m, 2.1m, 2.4m, & 3.0m.
Our log roll is available in three heights. Half logs secured at the back with line wire. Pressure treated for ground contact.
All Rolls are 2m in length.
All our pegs are two way pointed. We stock the following sizes treated to UC4 (Ground Contact)
0.45m 50 x 50mm, 0.6m 50 x 50mm.
1.0m 50 x 50mm, 1.2m 50 x 50mm.
1.0m 75 x 75mm, 1.2m 75 x 75mm & 1.8m 75 x 75mm.
1.2m 38 x 38mm (Hedge Laying)
Our pressure treated pales come in a range of sizes and styles.
0.9 x 75 x 22mm Flat, Pointed, Round Top
0.9 x 100 x 22mm Flat & Round Top
1.2m x 75 x 22mm Flat, Pointed, Round Top
1.2m x 100 x 22mm Flat & Round Top
1.8m x 100 x 19mm Flat
1.8m & 2.4mx 100 x 22mm Flat
1.8m x 150 x 22mm Flat
0.9 x 75 x 25mm (69 x 19mm Finish) Round & Pointed
0.9 x 75 x 22mm (69 x 15mm Finish) Round with eased edges
1.2 x 75 x 25mm (69 x 19mm Finish) Round & Pointed
1.2 x 75 x 22mm (69 x 15mm Finish) Round with eased edges
Brown Treated Timber
We stock a range of brown treated rails, posts and feather edge.
2.4m & 2.7m x 100 x 100mm
1.8m & 3.6m x 100 x 50mm
4.2m x 75 x 22mm
4.8m x 100 x 38mm
2.0m & 3.6m x 75 x 50mm
1.8 & 1.5m 2ex 125 x 22mm feather edge
* Brown treatment will fade over a period of about 6 months. the timber is still treated, the idea is that the treatment colour replaces your first coat of stain.
Softwood and Oak Sleepers
All our softwood sleepers are pressure treated for ground contact and we stock a good range of sizes.
1.2m x 200 x 100mm
1.8m x 200 x 100mm
2.4m x 200 x 100mm
3.0m x 200 x 100mm
2.4m x 245 x 120mm
3.0m x 245 x 120mm
PLANED/SMOOTH with eased edges 2.4m x 200 x 100mm
VALUE SLEEPER 2.4m x 200 x 100mm
OAK Sleeper 2.4m x 200x 100mm.
We stock a range of smooth timbers. Most are pressure treated with eased edges.
3.6m x 75 x 25mm (69 x 19mm Finish)
3.6m x 100 x 25mm (94 x 19mm Finish)
3.6m x 150 x 25mm (1444 x 19mm Finish)
3.6m x 75 x 50mm (69 x 44mm Finish)
3.6m x 100 x 38mm (96 x 32mm Finish)
3.6m x 100 x 50mm (96 x 44mm Finish)
3.6m x 150 x 50mm (144 x 44mm Finish)
3.6m x 50 x 25mm (44 x 19mm Sq. Edge Finish) Ideal for Venetian fencing.
We stock smooth/planed timber posts most have eased edges. All our posts are pressure treated for ground contact.
2.4m x 75 x 75mm (69 x 69 Finish)
1.8m x 100 x 100mm (96 x 96mm Finish)
2.4m x 100x 100mm (96 x 96mm Finish)
3.0m x 100 x 100mm (96 x 96mm Finish)
3.0m x 150 x 150mm (144 x 144mm 4ww Sq. Edge Finish)
Our D rail has many applications. It can be used as a capping, handrail and for trimming. Planed finish with two curved edges.
3.6m x 100 x 38mm (96 x 32mm Finish)
Small Timber Sections
We offer smaller timber sections ideal for roofing, venetian fencing, building trellis and for using as gate stops.
1.8m x 19 x 19mm
3.6m x 38 x 19mm
3.6m x 50 x 25mm sawn & Planed (planed 44 x 19mm Finish)
The 50 x 25mm planed is square edge and is perfect for creating venetian fencing which is currently in fashion.
Finials & Caps
We offer a good range of finials & caps to suit 75 x 75mm & 100 x 100mm posts.
Western Red Cedar
We now stock 3.6m x 50 x 25mm Planed (44 x 199mm finish) western red cedar baton. Perfect for Venetian fencing.
NET Price £9.99 Each Plus VAT
Plywood & OSB
We can offer plywood & OSB sheets all 1.22m x 2.44 (8 x4)
9mm Elliottis Pine Plywood CE2 2440 x 1220
2.44 x 1.22m 12mm Lumin CE2 Pl
2.44 x 1.22m 18mm Pine Structural CCX Eucalyptus CE2
All our plywood is suitable for exterior use but MUST be primed and sealed before it is exposed to the elements or moisture.
OSM 18MM & 12MM
Features and Benefits
OSB is a versatile and durable building board. OSB has superb load-bearing properties.
Suitable for wall sheathing, flooring, roofing, general construction and renovation work, formwork and long term site hoardings.
OSB 2 conforms to EN300. OSB 3 also conforms to BS EN5268-2, BBA and Class E1.
Birch Phenolic Ply 1220 x 2440 18mm. A heavy-duty panel with long-lasting mesh pattern overlay, producing slip resistance. Applications include vehicle floors, ship decking, warehouse and factory hall floors, loading docks and warehouse shelving. These plywood floor panels are ideal panels for applications that require highly wear resistant and rough surfaces.
Duraply (New Product)
Panel modified through an innovative ply-to-ply process that gives it exceptional durable properties. Immune to attack by fungi and insects, even
in the most demanding conditions. Detailed information can be handed over in branch.
12mm -EN314-2 class 3, EN636-3S EN13986
18mm EN314-2 class 3, EN636-3S EN1398
10 year warranty on duraply. T&CS apply
1220 x 2440 18mm
Conforms to BS EN636-3, BS 1088, CE2+ and Class E1 .
18mm MDF Pro
2440 x 1220mm
Understanding Plywood Grading
EUROPEAN UNION TIMBER REGULATION (EUTR) All our panel products are EUTR compliant, a regulation designed to combat the trading and harvesting of
illegal timber. Metsä Wood (our suppliers of Marine & metsadeck use a recognised due diligence tool which analyses the risk of illegal timber entering
the supply chain.
CE MARKING The CE mark is a fitness for purpose, not a quality mark. CE marking, along with the supporting documentation, is the way for manufacturers to demonstrate that their products conform to a harmonised technical specification and therefore the CPD (Construction Products Directive). The technical specification to permit CE marking of plywood is EN13986 - Wood based panels for use in construction.
Is a standard for the structural testing of panel products, but is only applicable to the test undertaken. If the panel is to be used for flooring, roofing or wall sheathing, test data applicable to these specific end uses should be available on request. If in doubt, ask. It is the manufacturer’s responsibility to provide the structural test data to support the CE2+ claim. If the mill or supplier cannot provide the relevant test information and show that the test is applicable to the required end use, i.e. Walls, Floors and Roofs, it is not an appropriately tested product for these end uses even if it carries a CE2+ mark. Structural data should consist of bending strength and stiffness, compression, tension and shear strength, impact resistance and point load.
BBA CERTIFIED Selecting BBA approved products is a sure way to avoid problems at a number of stages in the building process. BBA approved products will meet the criteria set out in the relevant Agrément Certificates to ensure the approved specification is met.
Species must comply with 1 of 3 performance classes within EN636. The three classes are as follows:
• EN636-1 Class 1, plywood will not delaminate in interior conditions (warm roofs, intermediate floors, timber frame and partition walls).
• EN636-2 Class 2, plywood will not delaminate in humid conditions or if it is to be used externally . Plywood should be treated or covered (cold roofs, ground floors, timber frame external walls).
Structural plywood with test data available to support structural status for specific end use.
Class 3, plywood will not break up in exterior weather conditions (fully exposed service conditions).
EN314 PART 2
Glue Bond, this is divided into 3 parts:
• EN314 CLASS 1 Dry conditions, appropriate for normal interior use. Replaces MR plywood.
• EN314 CLASS 2 Humid conditions, appropriate for protected external applications, capable of resisting weather exposure for short periods of time. Also suitable for interior use where the moisture level is raised above Class 1. Replaces Type 1.
• EN314 CLASS 3 Exterior conditions, able to withstand weathering conditions and liquid water over sustained periods of time.
BS1088 British standard covering the technical requirements for Marine plywood.
BS EN300 Applies to OSB and is the standard applicable for dimensional tolerances, humidity , moisture, swelling, thickness, strength of materials, bending, modulus of elasticity , tensile strength.
E1 EMMISIONS CLASS Covers the amount of formaldehyde released by the glue line. The glue used in plywood construction is a significant part of the cost make-up. A way to reduce that cost is to use more formaldehyde in the glue thus increasing the formaldehyde released by a panel. ‘Non Interior’ and ‘External Use Only’ is generally a sign that the panel has an E2 or worse formaldehyde rating. Boards of Class E1 can be used both internally and externally and will have less chance of causing irritation. Boards with an E1 rating in an internal situation will cause no greater concentration than 0.1 ppm of formaldehyde, conforming to the guidelines of the World Health Organisation.
Visit our news page to read why there is “No Such thing as WPB ply."
Peeled & Pointed
We offer a good range of peeled and pointed posts. They have a more natural look to them and they vary in their diameter.
4’6 x 2-3 inch
5’6 x 2-3 & 3-4 inch
6’ x 2-3 & 3-4 inch
8’ x 5-6, 6-7 & 7-8 inch
12’ half round rail 3’ 1/2 to 4 1/2 inches
Machined Round Posts, Logs & Half Rounds
Our machine round posts are pressure treated to UC4. Most come with a chamfered top and we offer them in a range of sizes from 40mm diameter all the
way up to 150mm diameter. Please see our price list for the full range of sizes.
We also offer a range of jump poles, flat bottom logs and half rounds
3.6m x 87mm, 100, 125 & 150mm Diameter. Treated UC3
3.6m x 87 & 100mm (flat face) half round rails
1.8m x 100mm & 1.650 x 115mm half round pointed posts.
See our price list for our range of flat bottom logs.
Cedar Shingles & Ridges
Our western red cedar shingles are available in a pack. They are mixed widths but all are 450mm long, pack coverage is 2.13m2. There are many grades
of cedar available but ours are top quality and officially rated as grade 1 blue.
Our western red cedar ridges are available in a pack. They cover 4.5 l/m.
Our pressure treated and smooth log lap is perfect for shed construction.
Available in 5.1m lengths 125 x 25mm (finish 120 x 19mm)
Coverage approx. 120mm. 0.56m2
Tongue & Groove
Our smooth, pressure treated tongue & grove is perfect for shed & gate projects.
Available in 5.1m lengths. Coverage approximately 110mm 0.51 m2
125 x 16mm (finish 120 x 12mm)
125 x 25mm (finish 120 x 18mm)
Our smooth, pressure treated shiplap is perfect for shed projects.
Available in 5.1m lengths. Coverage approximately 120mm. 0.56 m2
125 x 25mm (finish 120 x 18mm)